Buscar
Mostrando ítems 1-6 de 6
Experimental Research on the Influence of Polypropylene Macrofiber Thickness in Fiber-Reinforced Concrete Mechanical Strengths
(Springer, 2023)
Acceso restringido
Herein, the effects of polypropylene fiber thickness on the compressive strength, split tensile strength, and flexural strength or modulus of rupture of polypropylene fiber reinforced concrete (PPFRC) were investigated. ...
Validation of a Hemi-Variational Block-Based Approach to the Modelling of Common In-plane Failures in Masonry Structures
(Springer, 2023)
Acceso restringido
Numerical simulations of several planar failure modes of masonry structures are presented, based on the model and solving code from a recent hemivariational block-based model inspired from granular micromechanics (Tran et ...
Influence of Soil-Pile-Structure Interaction on Seismic Response of Reinforced Concrete Buildings
(Springer, 2023)
Acceso restringido
It is well known that Peru is located in one of the most active seismic zones in the world and seismic design is a primary concern. Building constructions has increased in Peru during the last few years, especially on the ...
Artificial Intelligence Applied to the Control and Monitoring of Construction Site Personnel
(Springer, 2023)
Acceso restringido
Many countries are working towards gradually lifting restrictions generated by the COVID-19 virus as post-quarantine measures. The construction industry has had to adapt to new forms of work with economic and physical ...
Use of Residues from the Metallurgical Industry in Construction
(Springer, 2023)
Acceso restringido
The metallurgical industry produces a large amount of residues and wastes that can be successfully applied in building and construction. Key sectors, like iron and steel, aluminium, copper, zinc, lead, silicon and ferrosilicon, ...
Finite Element Model for End-Plate Beam-to-Column Connections Under Bending and Axial Forces
(Springer, 2023)
Acceso restringido
The assessment of steel beam-to-column connections is a fundamental piece in the design process of steel structures according to the guidelines established by standards such as Eurocode 3—Part 1.8 and ANSI/AISC 358-16. In ...