Mostrar el registro sencillo del ítem

dc.contributor.advisorQuiroz Flores, Juan Carlos
dc.contributor.authorOstos Sanchez, Lizbeth Yahaira
dc.contributor.authorLivia Chuzon, Renzo Omar
dc.date.accessioned2024-05-07T20:35:12Z
dc.date.available2024-05-07T20:35:12Z
dc.date.issued2024
dc.identifier.citationOstos Sanchez, L. Y. & Livia Chuzon, R. O. (2024). Safety model based on 5S, TPM and work standardization to reduce the accident rate in an SME in the construction sector [Tesis para optar el Título Profesional de Ingeniero Industrial, Universidad de Lima]. Repositorio Institucional de la Universidad de Lima. https://hdl.handle.net/20.500.12724/20348es_PE
dc.identifier.urihttps://hdl.handle.net/20.500.12724/20348
dc.description.abstractThe construction sector is an important driver of the economy and a generator of employment, but it has high occupational accident rates each year. In Peru, small construction companies lack an occupational health and safety management system, which is reflected in the number of accidents reported each year, which is as high as 3,000. Therefore, it is important to look after the welfare of the most valuable asset of each company: the worker. This paper presents a proposal for a safety model based on Lean tools: 5S and TPM, and work standardization to reduce the accident rate in a Peruvian construction SME. The proposed model is divided into three components that represent the application of each of the tools. It also consists of four phases and a duration of two months divided into four fortnights. Finally, the results obtained were favorable, reducing the accident rate by 75% with respect to the initial situation.en_EN
dc.description.abstractEl sector de la construcción es un importante impulsor de la economía y generador de empleo, pero presenta altas tasas de accidentes laborales cada año. En Perú, las pequeñas empresas de construcción carecen de un sistema de gestión de salud y seguridad ocupacional, lo que se refleja en el elevado número de accidentes reportados anualmente, alcanzando hasta 3,000. Por lo tanto, es crucial velar por el bienestar del activo más valioso de cada empresa: el trabajador. Este documento presenta una propuesta de un modelo de seguridad basado en herramientas Lean: 5S y TPM, y estandarización del trabajo, con el objetivo de reducir la tasa de accidentes en una PYME de construcción en Perú. El modelo propuesto se divide en tres componentes que representan la aplicación de cada una de las herramientas. También consta de cuatro fases con una duración de dos meses divididos en cuatro quincenas. Finalmente, los resultados obtenidos fueron favorables, logrando reducir la tasa de accidentes en un 75% en comparación con la situación inicial.es_PE
dc.formatapplication/pdf
dc.language.isoeng
dc.publisherUniversidad de Lima
dc.rightsinfo:eu-repo/semantics/openAccess*
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/4.0/*
dc.sourceRepositorio Institucional Ulima
dc.sourceUniversidad de Lima
dc.subjectSeguridad industriales_PE
dc.subjectEstándares de desempeñoes_PE
dc.subjectPequeñas y medianas empresases_PE
dc.subjectMantenimiento productivo totales_PE
dc.subjectIndustria de la construcciónes_PE
dc.subjectIndustrial safetyen_EN
dc.subjectPerformance standardsen_EN
dc.subjectSmall businessen_EN
dc.subjectTotal productive maintenanceen_EN
dc.subjectConstruction industryen_EN
dc.titleSafety model based on 5S, TPM and work standardization to reduce the accident rate in an SME in the construction sectoren_EN
dc.typeinfo:eu-repo/semantics/bachelorThesis
thesis.degree.levelTítulo profesionales_PE
thesis.degree.disciplineIngeniería Industriales_PE
thesis.degree.grantorUniversidad de Lima. Facultad de Ingenieríaes_PE
dc.publisher.countryPE
dc.type.otherTesis
thesis.degree.nameIngeniero Industriales_PE
renati.advisor.orcidhttps://orcid.org/0000-0003-1858-4123
renati.discipline722026
dc.identifier.isni121541816
renati.author.dni73376729
renati.author.dni74932245
renati.levelhttps://purl.org/pe-repo/renati/level#tituloProfesional*
renati.advisor.dni10300285
renati.jurorUrbina Rivera, Carlos Medardo
renati.jurorFlores Pérez, Albero Enrique
renati.jurorQuiroz Flores, Juan Carlos
renati.typehttps://purl.org/pe-repo/renati/type#tesis*
dc.subject.ocdehttps://purl.org/pe-repo/ocde/ford#2.11.04
ulima.cat015


Ficheros en el ítem

Thumbnail
Thumbnail
Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

info:eu-repo/semantics/openAccess
Excepto si se señala otra cosa, la licencia del ítem se describe como info:eu-repo/semantics/openAccess