Show simple item record

Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector

dc.contributor.authorQuiroz Flores, Juan Carlos
dc.contributor.authorCaceres Mauricio, Cesar Andres Victor
dc.contributor.authorRomero Vasquez, Daniel Elias
dc.contributor.otherQuiroz Flores, Juan Carlos
dc.date.accessioned2023-11-30T16:41:50Z
dc.date.available2023-11-30T16:41:50Z
dc.date.issued2023
dc.identifier.citationQuiroz-Flores, J. C., Cáceres-Mauricio, C. & Romero-Vasquez, D. (2023). Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector. In Proceedings of the 2023 21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023, Buenos Aires, Argentina, July 2023. https://laccei.org/LACCEI2023-BuenosAires/meta/FP206.htmles_PE
dc.identifier.issn2414-6390
dc.identifier.urihttps://hdl.handle.net/20.500.12724/19443
dc.description.abstractCurrently, SMEs are unable to meet the needs of customers, presenting problems for the delivery of complete orders on time. Based on an analysis of continuous improvement tools and integration of change management within the organization, a new production management model is proposed that manages to reduce delivery times; This model uses tools such as: DDMRP, 5S, JIDOKA, TPM and integrates change management with the Kotter model as a base. The proposed model was carried out in a pilot test of an SME in the textile and clothing sector, obtaining as results: an increase in Total (IF) and inventory precision of 87.77% and 95% respectively; in addition to the reduction of defective products by up to 2%.es_PE
dc.formatapplication/htmles_PE
dc.language.isoenges_PE
dc.publisherLatin American and Caribbean Consortium of Engineering Institutionses_PE
dc.relation.ispartofurn:issn: 2414-6390
dc.relation.ispartofurn:isbn: 978-628952074-3
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/4.0/*
dc.sourceRepositorio Institucional Ulimaes_PE
dc.sourceUniversidad de Limaes_PE
dc.subjectProducción eficientees_PE
dc.subjectPequeñas y medianas empresases_PE
dc.subjectEntrega de mercancíases_PE
dc.subjectIndustria textiles_PE
dc.subjectLean manufactoringes_PE
dc.subjectSmall businesses_PE
dc.subjectDelivery of goodses_PE
dc.subjectTextile industryes_PE
dc.titleProduction management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sectores_PE
dc.typeinfo:eu-repo/semantics/conferenceObject
dc.type.otherArtículo de conferencia en Scopus
ulima.areas.lineasdeinvestigacionDesarrollo empresarial / Operaciones y logísticaes_PE
dc.identifier.journalProceedings of the LACCEI international Multi-conference for Engineering, Education and Technologyes_PE
dc.publisher.countryUSes_PE
dc.subject.ocdehttps://purl.org/pe-repo/ocde/ford#2.11.04es_PE
dc.identifier.doihttps://dx.doi.org/10.18687/LACCEI2023.1.1.206
dc.contributor.studentCaceres Mauricio, Cesar Andres Victor (Ingeniería Industrial)
dc.contributor.studentRomero Vasquez, Daniel Elias (Ingeniería Industrial)
ulima.cat9
ulima.autor.afiliacionQuiroz Flores, Juan Carlos (Facultad de Ingeniería, Carrera de Ingeniería Industrial, Universidad de Lima)es_PE
ulima.autor.carreraQuiroz Flores, Juan Carlos (Ingeniería Industrial)es_PE


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess