Removal of nitrogen and phosphorus from domestic wastewater by electrocoagulation: Application of multilevel factorial design
Resumen
The main objective of this investigation was to evaluate the efficiency of electrocoagulation for the elimination of nitrogen and phosphorous from domestic wastewater and to determine the main operating parameters affecting the process. Accordingly, an acrylic reactor and aluminum (cathode) and iron (anode) electrodes were used. Tests were performed based on a multilevel factorial experimental design, considering current intensity, treatment time, and pH as factors. The design response variables were the percentage of nitrogen and phosphorous removal. In the case of phosphorus, removal rates of up to 99% were reached after 40 minutes of treatment with current intensities of 3 amps and at a modified pH of 6. Nitrogen removal was up to 27% with a treatment time of 40 minutes, 3 amps, and a pH of 6. Statistical analysis revealed that pH did not have a significant effect on the nitrogen removal process, whereas in phosphorus removal, the three factors influenced the process at a confidence level of 0.05. Results indicate that the electrocoagulation process in this type of water is very efficient in the removal of phosphorus, whereas for nitrogen, the efficiency decreases noticeably. However, electrocoagulation has an advantage over other conventional treatment technologies because it does not require additional treatment units to remove phosphorus.
Cómo citar
Aguilar-Ascón, E. (2020). Removal of nitrogen and phosphorus from domestic wastewater by electrocoagulation: Application of multilevel factorial design. Journal of Ecological Engineering, 21(7), 124-133. https://doi.org/10.12911/22998993/125439Editor
Polish Society of Ecological EngineeringÁrea / Línea de investigación
Calidad de vida y bienestar / SaneamientoTemas
Revista
Journal of Ecological EngineeringISSN
2299-8993Coleccion(es)
- Estudios Generales [112]
El ítem tiene asociados los siguientes ficheros de licencia: